The Solar Sun Ring® is a passive solar swimming pool heating device made from two sheets of heavyweight U.V. resistant vinyl. The upper clear layer holds insulating air and focuses sunlight on the blue colored lower layer. The blue layer absorbs about 50% of the sunlight and converts it to heat. The balance of the sunlight is allowed to pass through for deep water heating. At night the contained air acts as an insulating blanket to retain heat gained during daylight. Solar Sun Rings® are equipped with six magnets to improve clarity and decrease hardness of the water in your pool. The magnets are positioned to facilitate rafting. The strength of the magnets will permit single position removal but will easily separate to prevent entrapment in accidental falls. Solar Sun Rings® were designed to be compatible with automatic pool cleaners. In the event the suction hose catches on a ring, the ring will separate from the raft to allow the pool cleaner to continue. Neither water nor pool chemicals can evaporate through the Solar Sun Rings® two layers of heavyweight vinyl. You will save water and chemicals about equal to the percentage of the surface covered.
More from POOL & SPA NEWS
Solar Sun Rings Settles Suit with Walmart
In what is being seen as a victory for small business, Solar Sun Rings has settled a patent-infringement suit against Walmart.
More
Trademark Lawsuit Intensifies
After a counter lawsuit is filed and mediation backfires, two passive solar heating products manufacturers seem set for trial.
More
February 2013 Product Spotlight
A round-up of products.
More