A variety of issues surrounding the VGB Act are causing concern for industry professionals across Florida.
First, there’s the question of exactly who is
appropriately licensed to bring pools into compliance. Florida’s Construction Industry Licensing Board adheres to state statutes, but the language therein leaves plenty
of room for interpretation.
“The statute could have been written clearer,” said
Jennifer Hatfield, director of government and public affairs at the
Florida Swimming Pool Association. “We’re going to work
with [United Pool & Spa Association] to formulate a deck
statement request to send to the CILB to get them to make a
The issue is particularly sensitive given the economic climate,
she added. In Florida, where the market for new pools has been
decimated, the opportunity to do VGB work has become a vital part
FSPA will recommend that any modification to the piping or pool
shell, such as digging a deeper sump, should be done by someone
with a commercial building license.
“Unless it’s a simple cover replacement, all the
rest of the work should be done by [the holder of a] commercial
pool contractor license,” Hatfield said.
It is hoped that the suggested clarification will be ready to
appear on the CILB’s agenda by October, she added.
The only gray area appears to be frame replacement on covers.
While swapping “like for like” equipment can be
performed under a service license, replacing frames can involve
breaking up concrete and replastering — again, work
designated for a commercial builder’s license.
Moreover, frame replacements botched by inexperienced and
unlicensed technicians pose a much greater threat of
“If that frame is not secured correctly, you’ve gone
out and done something that’s become a larger hazard,”
said Jeff Clarkson, president of UPSA in Tampa, Fla.
Some of the improperly licensed work may stem from service
companies that encounter unanticipated modifications under the
“It’s a slippery slope once they get started,”
said Ken Gregory, who heads the commercial division of Holland Pools and
Spas, a Pool & Spa News Top Builder in Altamonte
Springs, Fla. “It’s kind of like eating peanuts —
it’s hard to get them to stop.”
Yet with close to 37,000 public pools in the state, some have
questioned the availability of labor if all VGB-related work is
relegated to a niche sector.
“You have tons of work out there that needs to get done by
somebody,” said James Hawkins, who owns Pool Service
America in North Miami Beach, Fla. “If they try to narrow
it down too tight, there’s no way in heck it will all get
As facilities procrastinate on dipping into already sapped
budgets, the problem could be exacerbated when the Florida
Department of Health ramps up enforcement later this year.
This is the root of a thorny dilemma for operators. In addition
to VGB requirements, the state is mandating re-rated covers for a
slower water velocity.
But, more importantly, new Florida Department of Health
guidelines state that over the next four years every commercial
pool and spa will need to utilize a gravity feed system. That
directive begins in May 2010, when all wading pools must retrofit
to feature that design.
“I’m already receiving calls from people concerned
about the money it’s going to cost,” Hatfield said.
Between surge tank installation, hydraulic redesign and engineer
verification, these installations can quickly rise north of
$20,000, which is considerably outside many operators’
“These are very old pools in a lot of cases and the
extensive renovation in order to go to gravity-feed is really not
feasible,” Gregory said. “There’s a certain
percentage of people who are just filling in the pools.”
Though the vast majority of commercial pools in Florida already
use gravity-feed systems, there are still close to 6,000 vessels
that will require a retrofit between now and 2013, according to the
state health department.
Furthermore, the dearth of qualified engineers and licensed
builders could drive prices even higher.